Driving your vehicle
846
Forward Collision-Avoidance Assist (FCA) (Sensor
fusion)
Detecting sensor
[1]: Front view camera, [2]: Front radar
Refer to the picture above for the
detailed location of the detecting
sensors.
Take the following precautions to
maintain optimal performance of
the detecting sensor:
䳜 Never disassemble the detecting
sensor or sensor assembly, or
apply any impact on it.
䳜 If the detecting sensor have been
replaced or repaired have the
vehicle inspected by a profes
-
sional workshop. Kia recom
-
mends to visit an authorised Kia
dealer/service partner.
䳜 Never install any accessories or
stickers on the front windscreen,
or tint the front windscreen.
䳜 Pay extreme caution to keep the
front view camera dry.
䳜 Never place any reflective objects
(i.e. white paper, mirror) over the
dashboard. Any light reflection
may prevent the function from
functioning properly.
䳜 Do not apply license plate frame
or objects, such as a bumper
sticker, film or a bumper guard,
near the front radar cover.
䳜 Always keep the front radar and
cover clean and free of dirt and
debris. Use only a soft cloth to
wash the vehicle. Do not spray
pressurized water directly on the
sensor or sensor cover.
䳜 If unnecessary force has been
applied to the radar or around the
radar, Forward Collision-Avoid
-
ance Assist may not properly
operate even though a warning
message does not appear on the
cluster. In this case, have the
vehicle inspected by a profes
-
sional workshop. Kia recom
-
mends to visit an authorised Kia
dealer/service partner.
To Next Page
Loading...
