107
6
6
Driving your vehicle Blind-Spot Collision-Avoidance Assist (BCA)
䳜 If there is impact on the rear cor
-
ner radar or near the radar, even
though the warning message
does not appear on the cluster,
Blind-Spot Safety system may
not operate properly. In this case,
have your vehicle inspected by a
professional workshop. Kia rec
-
ommends to contact an
authorised Kia dealer/service
partner.
䳜 If the rear corner radars have
been replaced or repaired, In this
case, have your vehicle inspected
by a professional workshop. Kia
recommends to contact an
authorised Kia dealer/service
partner.
䳜 Use only genuine parts to repair
the rear bumper where the rear
corner radar is located.
䳜 Do not apply license plate frame
or objects, such as a bumper
sticker, film or a bumper guard
near the rear corner radar.
䳜 The function may not work prop
-
erly if the bumper has been
replaced, or the surroundings of
the rear corner radar has been
damaged or paint has been
applied.
䳜 If a trailer, carrier, etc. is installed,
it may adversely affect the per
-
formance of the rear corner radar
or the function may not operate.
For more details on the precautions
of the front view camera, refer to
"Forward Collision-Avoidance Assist
(FCA) (Sensor fusion) (if equipped)"
on page 6-83.
Function settings
Setting
Blind-Spot Safety
With the ignition switch or ENGINE
START/STOP button in the ON posi
-
tion, select 'Driver assistance →
Blind-spot safety' from the 'Setup
→ Vehicle (LCD Display) or Settings
→ Vehicle (Infotainment System
screen)' menu to set whether or not
to use each function.
䳜 If 䳒Active assist䳓 is selected, the
function will warn the driver with
a warning message, an audible
warning, steering wheel vibration
and braking assist will be applied
To Next Page
Loading...
