Driving your vehicle
1086
Blind-Spot Collision-Avoidance Assist (BCA)
depending on the collision risk lev
-
els.
䳜 If 䳒Warning only䳓 is selected, the
function will warn the driver with
a warning message, an audible
warning and steering wheel vibra
-
tion depending on the collision risk
levels. Braking will not be assisted.
When the engine is restarted with
the function off, the 䳒Blind spot
safety system is Off䳓 message will
appear on the cluster.
If you change the setting from 䳒Off䳓
to 䳒Active assist䳓 or 䳒Warning only䳓,
the warning light on the side view
mirror (outside mirror) will blink for
approximately 3 seconds.
In addition, if the engine is turned
on, when the function is set to
䳒Active assist䳓 or 䳒Warning Only䳓, the
warning light on the side view mir
-
ror (outside mirror) will blink for
approximately 3 seconds.
䳜 If 䳒Warning only䳓 is selected, brak
-
ing is not assisted.
䳜 If 䳒Off䳓 is selected, the driver
should always be aware of the
surroundings and drive safely.
If the engine is restarted, Blind-Spot
Safety system will maintain the last
setting.
Warning timing
With the ignition switch or ENGINE
START/STOP button in the ON posi
-
tion, select 'Driver assistance →
Warning timing' from the 'Setup →
Vehicle (LCD Display) or Settings →
Vehicle (Infotainment System
screen)' menu to change the initial
warning activation time for Blind-
Spot Safety system.
To Next Page
Loading...
