Kia Cerato 2021 - Windscreen Defrosting and Defogging

161
4
4
Features of your vehicle Windscreen defrosting and defogging
Turning off the front air climate
control
䳜 Press the OFF button to turn off
the air climate control system.
However, you can still operate the
mode and air intake buttons as
long as the ignition switch or the
ENGINE START/STOP Button is in
the ON position.
Windscreen defrosting and
defogging
When the windscreen is covered
with frost or moisture, the front
view is blurred, so you should
remove the frost and moisture.
WARNING
windscreen heating
Do not use the or position
during cooling operation in
extremely humid weather. The dif
-
ference between the temperature
of the outside air and the
windscreen could cause the outer
surface of the windscreen to fog up,
causing loss of visibility. In this case,
set the mode selection to the
position and fan speed control to
the lower speed.
䳜 For maximum defrosting, set the
temperature control to the
extreme right/hot position and
the fan speed control to the high
-
est speed.
䳜 If warm air to the floor is desired
whilst defrosting or defogging,
set the mode to the floor-defrost
position.
䳜 Before driving, clear all snow and
ice from the windscreen, rear
window, outside rear view mir
-
rors, and all side windows.
OBD041322R