173
4
4
Features of your vehicle Interior features
Front seat
Rear seat
With the ignition switch or ENGINE
START/STOP button in the ON posi
-
tion:
䳜 Push either of the buttons to
warm the driver's seat or the
front passenger's seat.
During mild weather or under condi
-
tions where the operation of the
seat warmer is not needed, keep
the levers/switch in the "OFF" posi
-
tion.
Temperature control (Manual)
䳜 Each time you press the button,
the temperature setting of the
seat will change as follows:
-Front seat
- Rear seat
䳜 The seat warmer defaults to the
OFF position whenever the igni
-
tion switch or ENGINE START/
STOP button is turned on.
Temperature control (Automatic)
The seat warmer starts to auto
-
matically control the seat tempera
-
ture in order to prevent low-
temperature burns after being
manually turned ON.
You may manually press the button
to increase the seat temperature.
However, it soon returns to the
automatic mode again.
䳜 When pressing the button for
more than 1.5 seconds with the
seat warmer operating, the seat
warmer will turn OFF.
To Next Page
Loading...
