Kia Cerato 2021 - Page 295

15
5
5
Infotainment system Infotainment system
䳜 Sound settings: You can change
the settings related to sounds,
such as location where sound will
be concentrated and the output
level for each range.
- Position: Select a location
where sound will be concen
-
trated in the vehicle. Select
Fade (Fader) or Balance, turn
the [TUNE] knob to select the
desired position, and then press
the knob. To set sound to be
centred in the vehicle, select
Centre (Centre).
- Equaliser (Tone): Adjust the
output level for each sound
tone mode.
- Sound experience: (if equipped)
select the location where sound
is focused in the vehicle
between the driver's seat and
all other seats.
- Speed dependent vol.: Set the
volume to be adjusted auto
-
matically according to your
driving speed.
NOTICE
䳜 Depending on vehicle models or
specifications, available options
may vary.
䳜 Depending on the system or
amplifier specifications applied to
your vehicle, available options
may vary.
䳜 Mode popup: Set to display mode
selection window when the
[RADIO] button is pressed on the
control panel.
䳜 Date/Time: You can change the
date and time that are shown on
the system display.
- Set date: Set date to display on
the system display.
- Set time: Set time to display on
the system display.
- Time format: Select to display
time in the 12 hour format or
the 24 hour format.
- Display (Power Off): Set to dis
-
play the clock when the system
power is off.
䳜 Language: You can change the
display language.