Kia Cerato 2021 - Brake system; ESC OFF condition

61
6
6
Driving your vehicle Brake system
When operating
When the ESC is in operation,
the ESC indicator light blinks.
䳜When the Electronic Stability
Control is operating properly, you
can feel a slight pulsation in the
vehicle. This is only the effect of
brake control and indicates noth
-
ing unusual.
䳜 When moving out of the mud or
driving on a slippery road, the
engine rpm (revolution per min
-
ute) may not be increased even if
you press the accelerator pedal
deeply. This is to maintain the
stability and traction of the vehi
-
cle and does not indicate a prob
-
lem.
ESC OFF condition
To cancel ESC operation :
䳜State 1
Press the ESC OFF button shortly
(ESC OFF indicator light and mes
-
sage illuminates). At this state,
the engine control function does
not operate. In other words, the
traction control function does not
operate but only the brake control
function operates.
䳜 State 2
Press the ESC OFF button for
more than 3 seconds. ESC OFF
indicator light and message illu
-
minates and ESC OFF warning
chime will sound. At this state,
the engine control function and
brake control function does not
operate. In other words, the vehi
-
cle stability control function does
not operate any more.
If the ignition switch or ENGINE
START/STOP button is placed to
the LOCK/OFF position when ESC
is off, ESC remains off. Upon
restarting the engine, the ESC will
automatically turn on again.
OMQ4050059R
OMQ4050060R