117
6
6
Driving your vehicle Blind-Spot Collision-Avoidance Assist (BCA)
Driving where the road is merging/
dividing
Blind-Spot Safety system may not
operate properly when driving
where the road merges or divides.
The function may not detect the
vehicle in the next lane.
Always pay attention to road and
driving conditions whilst driving.
Driving on a slope
Blind-Spot Safety system may not
operate properly when driving on a
slope. The function may not detect
the vehicle in the next lane or may
incorrectly detect the ground or
structure.
Always pay attention to road and
driving conditions whilst driving.
Driving where the heights of the
lanes are different
Blind-Spot Safety system may not
operate properly when driving
where the heights of the lanes are
different. The function may not
detect the vehicle on a road with
different lane heights (underpass
joining section, grade separated
intersections, etc.).
Always pay attention to road and
driving conditions whilst driving.
䳜 When you are towing a trailer or
another vehicle, make sure that
you turn off Blind-Spot Safety
system.
䳜 Blind-Spot Safety system may
not operate normally if inter
-
fered by strong electromagnetic
waves.
To Next Page
Loading...
