43
3
3
Safety features of your vehicle Child restraint system (CRS)
release button so that it is easy to
access in case of an emergency.
3. Remove as much slack from the
belt as possible by pushing down
on the Child Restraint System
whilst feeding the shoulder belt
back into the retractor.
4. Push and pull on the Child
Restraint System to confirm that
the seat belt is holding it firmly in
place.
If your Child Restraint System man
-
ufacturer recommends the use of
atop-tether with the lap/shoulder
belt, "ISOFIX anchorage and top-
tether anchorage (ISOFIX anchor
-
age system) for children" on page 3-
38.
To remove the Child Restraint Sys
-
tem, press the release button on
the buckle and then pull the lap/
shoulder belt out of the Child
Restraint System and allow the seat
belt to retract fully.
To Next Page
Loading...
