Chapter 3: System operation
162 P/N 3102351-EN • REV 005 • ISS 28DEC18
To end a walk test:
1. Press the Menu button and choose Test.
2. Choose Walk Test Silent or Walk Test Audible.
3. Choose either All Devices or Zone.
4. If you chose Zone, enter the zone ID of the zone where you are ending the walk test.
5. Choose End to turn off the walk test. All of the devices that were activated in the test are
restored at this time.
6. Press Cancel to return to the previous menu.
— or —
Press the Menu button to exit menu mode.
To Next Page
Loading...
