Kidde VS Series User Manual

Chapter 2: Front panel programming
P/N 3102351-EN • REV 005 • ISS 28DEC18 61
Table 18: Sample values for daylight saving time
Month start:
Week start:
Week day start:
Hour start:
March
Second
Sunday
2
Month end:
Week end:
Week day end:
Hour end:
November
First
Sunday
2
Adjustment
minutes: 60
Changing the passwords
The second step in programming the panel is to change the level one, level two, and remote
annunciator passwords.
Notes
• We recommend that you change the default passwords before programming the system.
• The system automatically logs you off after four minutes of inactivity.
To change the passwords:
1. Press the Menu button and choose Program.
2. Choose Password.
3. Enter a level two password.
4. Select the password to be changed: Level 1, Level 2, or Remote (Ann.).
5. Enter the old password and press Enter.
6. Enter the new password and press Enter.
7. Repeat steps 4 through 6 for each password to be changed.
8. Press the Menu button to exit menu mode, or continue programming.
Restoring the factory default settings
Use the Restore Defaults command to overwrite most custom settings in the panel, the dialer
(CMS network), or both. This lets you commission the panel as a common alarm system, or
remove custom settings in preparation for advanced programming.

Kidde VS Series Specifications

General

Power Source	120V AC
Battery Backup	9V battery
Sensor Type	Photoelectric
Alarm Sound Level	85 dB at 10 feet
Hush Feature	Yes
Test Button	Yes
LED Indicator	Yes
Mounting Type	Wall or ceiling
Compliance	UL 217