Kidde VS Series User Manual

Appendix E: Releasing Module
250 P/N 3102351-EN • REV 005 • ISS 28DEC18
Device
Condition LED LCD message
None
Pull (Manual)
Supervised
Output
(Prerelease_1)
None
(Prerelease_2)
Supervised
Output
(Release_1)
None
(Release_2)
No riser Trouble Trouble
Expanded message: Internal fault [2}
Supervised
Output
(Release_1)
Short Trouble Trouble
Release_1 [1]
Expanded message: Supervised output short
Open Trouble Trouble
Release_1 [1]
Expanded message: Supervised output open
None
(Release_2)
Short Trouble Trouble
Release_2 [1]
Expanded message: Supervised output short
Open Trouble Trouble
Release_2 [1]
Expanded message: Supervised output open
[1] Message requires user programming
Specifications
Table 56 lists the power riser and signaling line circuit specification for the REL.
Table 56: Specifications
Power riser
Input voltage
Standby current
Alarm current
Line resistance
18.4 to 27.4 VDC
17 mA, max.
190 mA, min. to 4.0 A, max. depending on circuit
load
See GSA-REL Technical Reference Manual (P/N 387515-EN)
Signaling line circuit
Voltage
Standby current
Alarm current
Line resistance
15.2 to 19.95 VDC
1.0 mA
1.0 mA
See loop controller installation sheet

Kidde VS Series Specifications

General

Power Source	120V AC
Battery Backup	9V battery
Sensor Type	Photoelectric
Alarm Sound Level	85 dB at 10 feet
Hush Feature	Yes
Test Button	Yes
LED Indicator	Yes
Mounting Type	Wall or ceiling
Compliance	UL 217