Chapter 4: Reports
P/N 3102351-EN • REV 005 • ISS 28DEC18 165
• Alarm: Includes only alarm events in the report
• Date forward: Lets you enter a starting date for the report. The report includes all events
from that date forward.
To view an All or Alarm History report:
1. Press the Menu button and choose Reports.
2. Choose History.
3. Choose either All or Alarm.
To view a Date Forward History report:
1. Press the Menu button and choose Reports.
2. Choose History.
3. Choose Date Forward.
4. Enter the starting date for the report (month/day/year).
Walk Test report
The Walk Test report extracts all test events for the last walk test stored in history. Walk test
reports can be printed or viewed on the LCD.
Notes
• You cannot view a walk test report while conducting a walk test.
• The walk test report includes all events (walk test and all other events) to show whether
other events occurred during the walk test.
• The walk test report cannot be viewed from history after restarting the panel.
• To include the activation and restoration of all walk test events in the walk test report, the
panel must be reset prior to ending the walk test. Once the reset is complete, you can end
the walk test and view a walk test report.
To view a Walk Test report:
1. Press the Menu button and choose Reports.
2. Choose Walk Test.
To Next Page
Loading...
Need help?
General
