Kohler RD 441 - Injection Advance Specified Value; Injection Advance Adjustment

- 67 -
Workshop Manual KD 441_cod. 1.5302.865_2
nd
ed_ rev. 01.
8
α
164
B A
C
A/C mm
27.21 12
165
α
A/C mm
6
7
8
9
10
11
12
13
14
15
13.61
15.87
18.14
20.41
22.68
24.94
27.21
29.48
31.75
34.02
Fuel system
Motor type with external
Øywheel
260
References on the ywheel
A=ReferenceofxedTDConcrankcase
B=Injectionleadreferenceontheywheel
C=TDCreferenceonywheel
α = Reference in degrees between B and C.
recorded to 3600 [rpm]
Injection advance adjustment
To alter the value of injection advance the pad must be replaced with
anotherofasuitablethickness(seeg.83÷83_a).
To extract pad B, use a rod with a suction cap or magnet at one end.
The replacement pads supplied have 10 different thicknesses
(between 4.0 and 4.9mm).
Note: When the thickness of the pad varies by 0.1mm under the
pump, Bisdelayedorbroughtforwardby1°ontheywheel.
Injection advance specied value
Conversion table from millimetres into degrees