Kohler RD 441

- 75 -
Workshop Manual KD 441_cod. 1.5302.865_2
nd
ed_ rev. 01.
185
184
A
10
A
187
186
1
2
3
B
C
Keeping lever C displaced, close the hole with plug A and gasket B.
With a special tool matr.1460-342, mount the nut on the threaded pin
Adjustments
Setting the slow idle (standard) rotation speed
Afterhaving lledtheengine with oilandfuel, startitand allow itto
warm up for 10 minutes.
Using adjuster screw 1, regulate the idling rate at 1000-1250 rpm.
Tighten the check nut 2.
Setting the fast idle (standard) rotation speed
After having adjusted the idling rate, operate lever A to accelerate the
engine.
Use screw 3 and regulate the top rate at 3800 rpm (for engines set at
3600 rpm on load).