EasyManuals Logo

Krone EasyCut 32 P Operating Instructions

Krone EasyCut 32 P
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Safety
16
Pos: 13.6.11 /B A/Sicherheit/Hydra ulikanlage @ 2\mod_1203 503691986_78. doc @ 66225
4.6 Hydraulic system
1 The hydraulic system is pressurised!
2 When connecting hydraulic cylinders and motors, make sure the hydraulic hoses are
connected as specified!
3 When connecting the hydraulic hoses to the tractor hydraulics, make sure that the
hydraulics of both the tractor and the implement have been depressurized!
4 In the case of hydraulic connections between tractor and machine, the coupling sleeves
and plugs should be marked to ensure a proper connection! Bei Vertauschen der
Anschlüsse umgekehrte Funktion (z.B. Heben/Senken) - Unfallgefahr!
5 When searching for leaks, use suitable aids to avoid the risk of injury!
6 Liquids escaping under high pressure (hydraulic oil) can penetrate the skin and cause
serious injury! Seek medical help immediately should injuries occur! Danger of infection!
7 Before working on the hydraulic system, depressurise the system and switch off the
engine!
Pos: 13.6.12 /B A/Sicherheit/Hydra ulikanlage Z usatz Alterung der Hydrauli kschlauchleitunge n @ 3\mod _1204552944 856_78.doc @ 7 0772
8 Check the hydraulic hose lines at regular intervals and replace them if damaged or worn!
The new hoses must fulfill the technical requirements set by the manufacturer of the
implement!
Pos: 13.6.13 /Üb erschriften/Üb erschriften 2/P-T /Reifen @ 0\mod_1197357 995667_78.doc @ 18075
4.7 Tyres
Pos: 13.6.14 /B A/Sicherheit/Reif en @ 0\mo d_11956464357 16_78.doc @ 1346
1 When working on the tyres, make sure that the implement is safely lowered and secured
against rolling (wheel chocks).
2 Installing wheels and tyres requires adequate knowledge and suitable tools!
3 Repair work on the tyres and wheels should be done by specially trained personnel using
appropriate installation tools only!
4 Check tyre pressure regularly! Inflate the tyres to the recommended pressures!
5 Check the wheel nuts periodically! Missing wheel nuts can result in a wheel falling off and
the machine tipping over.
Pos: 13.6.15 /B A/-----Seitenu mbruch------ @ 0\mod_119617 5311226_0.doc @ 4165

Table of Contents

Other manuals for Krone EasyCut 32 P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Krone EasyCut 32 P and is the answer not in the manual?

Krone EasyCut 32 P Specifications

General IconGeneral
BrandKrone
ModelEasyCut 32 P
CategoryLawn Mower
LanguageEnglish

Related product manuals