Krone EasyCut 32 P - Filling Quantities and Lubrication Designations for Gearboxes; Oil Level Check and Oil Change Intervals (Gearboxes)

Maintenance
49
Pos: 27.17 /Üb erschriften/Üb erschriften 2/F-J/F üllmengen u nd Schmiermittel bezeichnung en der Getriebe @ 0\mod_119 6951094046_78. doc @ 15335
10.5 Filling Quantities and Lubrication Designations for Gearboxes
Pos: 27.18 /BA/ Wartung/Tabelle n/Mähwer ke/Tabelle Füll mengen EC 28/32 @ 10\mod_1 221740251911_ 78.doc @ 1370 63
Filling
Quantity
Filtered oils
Bio-degradable
lubricants
[litres] Brand name Brand name
Angular gearbox EasyCut 28 (P) / 32 (P) 1.0 l
SAE90
On request
Angular gearbox EasyCut 28 M 0.5 l
Mower drive gearbox EasyCut 28 M 0.4 l
Cutter bar EasyCut 28 6.0 l
Cutter bar EasyCut 32 7.0 l
Pos: 27.19 /BA/ Wartung/Zeitinter valle an den Getrieben @ 0 \mod_1196951 919921_78. doc @ 15373
10.5.1 Oil Level Check and Oil Change Intervals (Gearboxes)
Note - Oil level check and oil change (gearboxes) and lubricating the machine
Effect: Long expected service life of machine
• First oil change on all gearboxes after 50 operating hours, then every 200 operating
hours (but at least once a year).
• Before using the machine always check the oil level.
• With bio-degradable oils the changing intervals must be complied with absolutely
because of ageing of the oils.
Pos: 27.20 /BA/-- ---Seitenum bruch------ @ 0\m od_119617531 1226_0.doc @ 4165