Krone EasyCut 32 P - Conversion to Narrower Swathing (Easycut 28 M, Easycut 32 M)

Special equipment
74
Pos: 35.1 /BA/So nderausstat ung/EasyCut/U mbau auf schm alere Schwada blage EC 28/3 2 M @ 13\mod_ 122692343591 2_78.doc @ 1 66497
14.2 Conversion to narrower swathing (EasyCut 28 M, EasyCut 32 M)
EC-281-0
1
2
4
4
3
3
4
4
4
4
5
5
6
6
EasyCut 28M
EasyCut32M
Fig. 40:
• Remove the cutting discs (5) and covers (6).
• Remove cover (3) of mower drum (4). Mount the mower drum with fastening bolts and the
detent edged washers of the disassembled cutting discs (6).
• Mount the cover (3) on the mower drum (4).
Note
Keep the cover (5) and cutting disc (6) in a suitable place for later
reinstallation.
Warning
Mower drum incorrectly installed
Effect: Damage to the machine
Make certain the mower drums are installed correctly! The installed mower
drums (4) must be installed at a 90-degree offset to the adjacent mower drums
/ cutting discs.