Krone EasyCut 32 P - Blade Changing on Cutting Discs

Maintenance
60
Pos: 27.27.18 /Ü berschriften/Ü berschriften 2/K- O/Messerwec hsel an Mess ertellern @ 0\m od_11972690 68562_78.doc @ 16521
10.10 Blade Changing on Cutting Discs
Pos: 27.27.19 / BA/Sicherheit/G efahrenhin weise/Mähwerke/ Schnell rotieren de Messerteller/M essertromm eln_1 @ 0\mo d_119701769 6736_78.doc @ 16001
Danger!
Rapidly rotating cutting discs/blade drums.
Effect: Danger to life or serious injuries.
• Switch off the engine and remove the ignition key.
• The cutting discs/blade drums continue to run!
• Do not leave the driver’s cab until the cutting discs/blade drums have
come to a complete stop.
Pos: 27.27.20 / BA/Sicherheit/G efahrenhin weise/Mähwerke/ Sich lösende M ähklingen @ 0\ mod_1197269 483265_78.doc @ 16540
Danger!
Cutter blades coming loose
Effect: Danger to life or serious injuries.
• After changing the blades check that they fit perfectly and that they can
move freely.
• Whenever a blade is changed, also inspect the fasteners and replace
them, if necessary!
• Always replace missing and damaged blades in sets to prevent
unbalanced rotation!
• Never mount unevenly worn blades on a drum/disc!
Pos: 27.27.21 / BA/-----Seiten umbruch------ @ 0\mod_11961 75311226_0.doc @ 4165