Special equipment
73
Pos: 31 /Übersc hriften/Übersc hriften 1/P-T/Son derausstattu ng @ 2\mod_12 02808469779_ 78.doc @ 616 49
14 Special equipment
Pos: 32 /Übersc hriften/Übersc hriften 2/P-T/Spezi elle Sicher heitshinweise @ 0\mod_11966 60495760_78. doc @ 9134
14.1 Special Safety Instructions
Pos: 33 /BA/Sic herheit/Gefahr enhinweise/M ähwerke/Gefa hr Wartung allge mein EasyCut @ 11\mod_122 3620198301_7 8.doc @ 1483 49
Danger!
When performing repair, maintenance or cleaning work on the machine, or in
the case of technical intervention, drive elements may start moving (caution,
the cutting discs continue to run).
Effect: Danger to life, injuries or damage to the machine.
• Move the machine to the working position and lower it to the ground
• Switch off the tractor engine and remove the ignition key.
• Secure the tractor against accidental start-up and against rolling.
• Switch off the PTO and disengage it.
• After repair, maintenance, cleaning work or technical modifications are
complete, mount all protective coverings and safety devices again
properly.
• Avoid skin contact with oils, greases, cleaning agents and solvents.
• In the event of injuries or burns due to oils, cleaning agents or solvents,
contact a doctor immediately.
• All other safety instructions must also be followed to avoid injuries and
accidents.
Pos: 34 /BA/----- Seitenumbruch--- --- @ 0\mod _1196175311 226_0.doc @ 4165
To Next Page
Loading...
Need help?
General
