Safety
23
7)
D
F
GB
I
D
El embrague de seguridad debe someterse a una
purga antes de la primera puesta en marcha y una
vez al año antes de iniciarse la campaña de trabajo.
E
La sécurité à friction doit faire l'objet d'une purge
lors de la première mise en route et une fois par
an avant le début de la saison.
The friction clutch must be bled at the first
operation and once a year before the harvesting
season.
La frizione di sicurezza deve essere sottomessa ad
uno spurgo alla prima messa in campo come pure
una volta all'anno prima della campagna.
Vor der Erstinbetriebnahme und 1x jährlich vor
der Ernte muss die Reibkupplung gelüftet werden
939 278 -2
80
125
939 278-2 (1x) (EasyCut 28 M / EasyCut 32 M)
27 005 384 0 (1x)
Pos: 13.16 /BA/Sic herheit/Nac hbestellung/ A nbringung Auf kleber @ 0\mo d_11956373371 07_78.doc @ 1 079
4.13.1 Re-Ordering the Adhesive Safety and Information Labels
Note
Every adhesive safety and information label is assigned an order number and
can be ordered directly from the manufacturer or from an authorized dealer
(see Section "Contact").
4.13.2 Affixing the Adhesive Safety and Information Labels
Note
Affixing an adhesive label
Effect: Adhesion of the label
• The surface for affixing the adhesive label must be clean and free of
dirt, oil and grease.
Pos: 14 /BA/----- Seitenumbruch--- --- @ 0\mod _1196175311 226_0.doc @ 4165
To Next Page
Loading...
Need help?
General
