Index 18
Original Operating Instructions 150000802_00_en 81
D
Damaged compressor unit ................................. 21
Danger associated with welding work ................ 22
Danger due to machine which is not prepared
properly for road travel ....................................... 18
Danger from damage to the machine................. 14
Danger of fire...................................................... 19
Danger of tipping over on slopes........................ 18
Danger when cornering with mounted machine . 18
Danger when driving on road and field............... 18
Danger zone because objects may shoot out .... 16
Danger zone between tractor and machine ....... 16
Danger zone due to coasting machine parts...... 17
Danger zone PTO shaft...................................... 16
Danger zone universal shaft............................... 16
Danger zone when drive is switched on............. 16
Danger zones ..................................................... 15
Dangers arising from environment ..................... 19
Dangers in connection with certain activities:
Working on the machine..................................... 21
Dangers in road traffic ........................................ 18
Declaration of conformity.................................... 85
Deviating tightening torques............................... 58
Directories and references ................................... 6
Driving and Transport......................................... 48
E
Ensuring functionality of safety devices ............. 17
Environmental protection and disposal .............. 19
F
Figures ................................................................. 7
Folding down safety device front........................ 44
Folding down side guard (working position) ....... 45
Folding up front safety device ............................ 43
Folding up side guard (transport position).......... 45
H
Hot liquids........................................................... 21
Hot surfaces ....................................................... 21
How to use this document .................................... 6
Hydraulic control units of the tractor................... 33
I
Icons in figures ..................................................... 7
Icons in the text .................................................... 7
Importance of operating instructions .................. 12
Increasing/reducing ground pressure................. 52
Information for enquiries and orders .............. 2, 31
Information on direction........................................ 7
Information on This Document ............................. 6
Initial Operation .................................................. 34
Inserting support jack (transport position) .......... 46
Installing universal shaft ..................................... 40
Intended use....................................................... 12
Intermediate universal shaft ............................... 31
J
Jobs on the machine .......................................... 14
L
Labelling ............................................................. 30
Life-threatening electric shock from overhead lines
........................................................................... 19
Liquids under high pressure ............................... 20
Locking screws on the gearboxes ...................... 57
Lower link pins.................................................... 35
Lowering machine from transport position to
working position.................................................. 46
Lowering support jack (parking position)............ 46
Lubricate universally-jointed drive shaft ............. 74
Lubricating intermediate universal shaft............. 75
Lubricating universal shaft.................................. 74
Lubrication chart - Machine ................................ 75
To Next Page
Loading...
