What to do if KTM Motorcycle combination instrument shows nothing in display?
If the combination instrument on your KTM motorcycle shows nothing in the display, it's possible that fuse 1 is blown, so you should change the fuse.
Why KTM Motorcycle engine cranks although it is in gear?
If your KTM motorcycle engine cranks even when it is in gear, it could be due to a defective safety start system or fuse 5 blown, so you should change the fuse.
What to do if KTM 2013 1190 RC8 R EU/UK Motorcycle speedometer in combination instrument doesn't work?
If the speedometer in your KTM motorcycle's combination instrument doesn't work, the wiring harness of the wheel revolution counter may be damaged, or the plug-in connector may be oxidized, so you should check the wheel speed sensor.
General| Brand | KTM |
|---|---|
| Model | 2013 1190 RC8 R EU/UK |
| Category | Motorcycle |
| Language | English |
Defines risk levels and associated symbols for hazard identification.
Guidelines for operating the vehicle safely and responsibly.
Highlights the importance of reading and keeping the owner's manual.
Details the location of the VIN and type label for vehicle identification.
Provides an overview of the motorcycle's main display and instrument panel.
Essential advice for new owners before the first ride.
Checklist of pre-ride inspections for roadworthiness.
Important safety warnings and techniques for effective braking.
Outlines the recommended maintenance intervals and tasks.
Crucial steps for checking and maintaining correct tire inflation.
Process for programming and managing the vehicle's ignition keys.
Procedure for checking the engine oil level at operating temperature.
Complete guide for engine oil and filter replacement.
Identifies causes and actions for starter system failure.
Diagnoses and resolves issues related to engine overheating.
Lists immobilizer error codes indicated by the warning lamp flashes.
Lists EFI warning lamp blink codes for engine diagnostic faults.
To Next Page