Kuka KL 1500-3 - 4.3 Plates and Labels

22 / 151 Issued: 16.06.2010 Version: MA KL 1500-3 T S 141215 V1 en
KL 1500-3; KL 1500-3 T; KL 1500-3 S
4.3 Plates and labels
Plates and labels The following plates and labels (>>> Fig. 4-6) are attached to the linear unit.
They must not be removed or rendered illegible. Illegible plates and labels
must be replaced.
Fig. 4-5: Mounting face for KR 150 to KR 270 (KR 2000 series)
1 M24 tapped hole, 16x
2 M8 tapped hole, 8x