54 / 151 Issued: 16.06.2010 Version: MA KL 1500-3 T S 141215 V1 en
KL 1500-3; KL 1500-3 T; KL 1500-3 S
7.2.2 Transportation by crane
Description The beam can be transported using a crane (>>> Fig. 7-2). All ropes must be
long enough and must be routed in such a way that the beam is not damaged.
When attaching the lifting tackle, care must be taken not to damage any com-
ponents (e.g. covers).
Caution!
The beam may tip during transportation. Risk of injury and damage to prop-
erty.
If the beam is being transported using lifting tackle, special care must be ex-
ercised to prevent it from tipping. Additional safeguarding measures must be
taken. It is forbidden to pick up the beam in any other way using a crane!
Fig. 7-2: Transportation by crane
To Next Page
Loading...