28 / 151 Issued: 16.06.2010 Version: MA KL 1500-3 T S 141215 V1 en
KL 1500-3; KL 1500-3 T; KL 1500-3 S
5.1.2 Intended use of the industrial robot
The industrial robot is intended exclusively for the use designated in the “Pur-
pose” chapter of the operating instructions or assembly instructions.
Using the industrial robot for any other or additional purpose is considered im-
permissible misuse. The manufacturer cannot be held liable for any damage
resulting from such use. The risk lies entirely with the user.
Operating the industrial robot and its options within the limits of its intended
use also involves observance of the operating and assembly instructions for
the individual components, with particular reference to the maintenance spec-
ifications.
Misuse Any use or application deviating from the intended use is deemed to be imper-
missible misuse. This includes e.g.:
Transportation of persons and animals
Use as a climbing aid
Operation outside the permissible operating parameters
Use in potentially explosive environments
Operation without additional safeguards
Outdoor operation
5.1.3 EC declaration of conformity and declaration of incorporation
This industrial robot constitutes partly completed machinery as defined by the
EC Machinery Directive. The industrial robot may only be put into operation if
the following preconditions are met:
The industrial robot is integrated into a complete system.
Or: The industrial robot, together with other machinery, constitutes a com-
plete system.
Or: All safety functions and safeguards required for operation in the com-
plete machine as defined by the EC Machinery Directive have been added
to the industrial robot.
The complete system complies with the EC Machinery Directive. This has
been confirmed by means of an assessment of conformity.
Declaration of
conformity
The system integrator must issue a declaration of conformity for the complete
system in accordance with the Machinery Directive. The declaration of con-
formity forms the basis for the CE mark for the system. The industrial robot
must be operated in accordance with the applicable national laws, regulations
and standards.
The robot controller is CE certified under the EMC Directive and the Low Volt-
age Directive.
Declaration of
incorporation
The industrial robot as partly completed machinery is supplied with a declara-
tion of incorporation in accordance with Annex II B of the EC Machinery Direc-
tive 2006/42/EC. The assembly instructions and a list of essential
requirements complied with in accordance with Annex I are integral parts of
this declaration of incorporation.
The declaration of incorporation declares that the start-up of the partly com-
pleted machinery remains impermissible until the partly completed machinery
has been incorporated into machinery, or has been assembled with other parts
Further information is contained in the “Purpose” chapter of the operating in-
structions or assembly instructions of the component.
To Next Page
Loading...