EasyManua.ls Logo

Kurzweil ExpressionMate - Page 120

Kurzweil ExpressionMate
138 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Sending MIDI Messages
110
'NF-' $8x NOTE-OFF <Key #> <Velocity>
'NO-' $9x NOTE-ON <Key #> <Velocity>
'PP-' $Ax POLY PRESSURE <Key #> <Pressure value>
'CC-' $Bx CONTROL CHANGE <Control #> <Value>
'PC-' $Cx PROGRAM CHANGE <Program #>
'CP-' $Dx CHANNEL PRESSURE <Pressure value>
'PB-' $E0 PITCHBEND <LSB Value> <MSB Value> 14 BIT C-VAL
'V7.' $E1 MOST SIG 7 BITS XXXXXXX-------
'V.7' $E2 LEAST SIG 7 BITS -------XXXXXXX
'V4.' $E3 LEFT 4 OF MOST SIG 8 BITS XXXX----------
'V.4' $E4 RIGHT 4 OF MOST SIG 8 BITS ----XXXX------
'V1.' $E5 LEFT 1 OF MOST SIG 8 BITS X-------------
'V.1' $E6 RIGHT 1 OF MOST SIG 8 BITS -------X------
'V8.' $E7 LEFT 7 OF MOST SIG 8 BITS XXXXXXX-------
'V.8' $E8 RIGHT 7 OF MOST SIG 8 BITS -XXXXXXX------
'ZCH' $E9 CHANNEL OF THIS ZONE, 0-15
'SU#' $EA THIS SETUP NUMBER
'ZON' $EB THIS ZONE
'KRZ' $EC KURZWEIL ID ($07)
'NUL' $ED NOT USED (NOTHING IS SENT)
'NUL' $EE NOT USED (NOTHING IS SENT)
'END' $EF END OF STRING
'SOX' $F0 START OF EXCLUSIVE <variable number of data bytes> EOX
'MTC' $F1 MIDI TIME CODE <data>
'SPP' $F2 SONG POSITION POINTER <LSB position> <MSB position>
'SSL' $F3 SONG SELECT <Song Number>
'$F4' $F4 UNDEFINED
'$F5' $F5 UNDEFINED
'TUN' $F6 TUNE REQUEST
'EOX' $F7 END OF EXCLUSIVE
'CLK' $F8 TIMING CLOCK
'$F9' $F9 UNDEFINED
'SRT' $FA START
'CON' $FB CONTINUE
'STP' $FC STOP
'$FD' $FD UNDEFINED
'SNS' $FE ACTIVE SENSING
'RES' $FF SYSTEM RESET
For the MIDI ÒChannel VoiceÓ status bytes (those with
mnemonics in the form of ÒXX-Ó above), if the right nybble
(channel Þeld) is zero (displayed as Ò-Ó), then the channel
number of the Zone sending the string will be substituted. If the
right nybble is 1-F (hex, equivalent to channels 1-15), then it is
sent literally, regardless of the zone's channel. Note that
Pitchbend does not have this feature; the zone's channel is always
used.

Table of Contents

Related product manuals