Kurzweil ExpressionMate - Getting Around; Global Parameter Set

Global Functions
Getting Around
76
Getting Around
You use the < and > buttons to scroll through parameter lists, and
to choose options from some menus. You use the data knob and
the - and + buttons to change or enter values. In some cases, you
can also hold the Learn button, and enter values using the Ribbon
or another continuous controller. Changes to Global parameters
take effect immediately; you donÕt have to save them.
Global Parameter Set
While in Play mode, press the Global button, and youÕll see this
screen:
-GLOBAL SELECT-
EDIT UTILITY
Press Edit (<) then press Select (<) to scroll through the list of
objects. When ÒEDIT Globl ParmsÓ appears on the top line of the
display, press Edit (>) to begin editing Global parameters. The
Þrst parameter is Contrast, as shown here:
GLOBAL 1:25
CONTRAST :25
The table below summarizes the Global parameters:
Parameter Range of Values
Contrast 0Ð64
Drum Sync Off, 5 to 50 milliseconds
RBN Dir Left, Right
MainMrgTo Off, Main, Aux
MainMgOpt Neithr, SysEx, RealTm,All
Aux MrgTo Off, Main, Aux
AuxMrgOpt Neithr, SysEx, RealTm,All
MergUnPro Notes, Cntrls, Both, Neithr
Arp Clock Int, Main, Aux
ontroller
C
12
Z ones E dit
A rpeggiator
13 23
G lobal
Compare