Global Functions
Setup Map
88
these lists so that they contain the Setups you want. There are
three lists containing 16 Setups each, for a total of 48 Setups.
SETUP LIST 1:12
3 Mono-Poly Sw
The top line shows which Setup List youÕre editing, followed by
the Step within that list. The bottom line shows which Setup is in
the current Step. Press the < and > buttons together to choose
which list to edit. Press either the < or > button to scroll through
the 16 Steps in each list. Use the data knob and -/+ buttons to
change the Setup in each Step.
Setup Map
The Setup Map routes incoming MIDI program changes to
ExpressionMate Setups. To edit the Setup Map from Play mode,
press the Global button, then press Edit (<) followed by Select
(<) to scroll through the list of objects. When ÒEDIT Setup MapÓ
appears on the top line of the display, press Edit (>).
MIDI PROG CH 111
48 Iceblink
Each of the 128 possible program changes (0-127) has an
associated ExpressionMate Setup number, or None. To access
them using an external MIDI device, you send program changes
to the port, channel, and program bank set in Global Parameters.
With Setup Map, you can synchronize the ExpressionMateÕs
Setups with sound setups on a synthesizer, then use an external
program change command to call up the appropriate
ExpressionMate Setup when you select a sound on your
synthesizer.
Also, some older instruments canÕt send enough program change
commands for you to access all the Setups in the ExpressionMate.
For instance, your keyboard might only transmit program
changes 0 through 63. If you want to use that keyboard to call up
Setup 64, assign the Setup to MIDI PROG CH 63 or lower:
MIDI PROG CH 63
64 SlowDrive
Note that the ExpressionMate will respond to program changes
only when youÕre in Play mode.
Saving and Reloading Setups
Global Utilities let you load and save Setups and view MIDI
operation with MIDIScope (described on page 92). Loading
To Next Page
Loading...
