Editing and Creating Setups
Editing Hints and Suggestions
60
the Setup, the ExpressionMate will send those values as if the
controller was in fact plugged in. (If the commands must go out
in a speciÞc order, read ÒController OrderÓ on page 56.)
Assigning a Message to Multiple Controllers
Sometimes you will want to assign the same Controller number
to more than one physical controller. For example, you might
want to control modulation depth with either the Ribbon or a CC
pedal. You can assign a particular MIDI message to as many
controllers as you want. (You can also assign multiple messages
to one physical controller. See ÒStacking ZonesÓ on page 25.)
To Next Page
Loading...
