Kurzweil Forte SE - Page 227

Multi Edit Mode
MAIN Page
11-9
MidiBank
e MIDI Bank parameter determines the MIDI Bank change message that the currently
selected Zone sends when the Multi is loaded. You can set this parameter to a MIDI Bank
change message from 0 to 16383.
When using the Forte SE as a MIDI controller, sending a MIDI Bank change message (along
with a MIDI Program change message) when a Multi is loaded ensures that the Program
loaded on the other sound modules in your MIDI chain is the Program that you want.
For example, if you’ve congured a Multi to work in a specic way with Program 32 in
Bank5 of a connected sound module, then set MIDI Bank to 5 and MIDI Program to 32.
is way, whenever you load this Multi, the sound module will automatically load Program
32 in Bank5.
NOTE : When you change the Program parameter, the MIDI Bank and MIDI Pro-
gram parameters will automatically change to match the Bank and Program num-
bers of the Program that you select for Local Program. For example, if you choose
Program 178, then MIDI Bank will change to 1 and MIDI Program will change to
50.
MidiProg
e MIDI Program parameter determines the MIDI Program change message that the
currently selected Zone sends when the Multi is loaded. You can set this parameter to a
MIDI Program change message from 0 to 127.
When using the Forte SE as a MIDI controller, sending a MIDI Program change message
(along with a MIDI bank change message) when a Multi is loaded ensures that the Program
loaded on the other sound modules in your MIDI chain is the Program that you want. For
example, if you’ve congured a Multi to work in a specic way with Program 32 in Bank5
of a connected sound module, then set MIDI Bank to 5 and MIDI Program to 32. is
way, whenever you load this Multi, the sound module will automatically load Program 32 in
Bank5.
EntryPrgChg
e Entry Program Change parameter determines whether or not the currently selected
Zone will send a MIDI Program change message when the Multi is loaded. You can set this
parameter to either O or On. When set to On, the Zone will send a MIDI Program change
message with the Program specied for the MIDI Program parameter.
Status
is displays the current Zone status (active or muted).