Kurzweil Forte SE - Page 318

System Mode
System Update
14-3
2. Connect the ash drive to the USB STORAGE slot of Forte SE.
3. Follow the instructions specied on page 14-1 to enter System Mode.
4. In System Mode, select System Update.
5. Select USB Device as the storage type.
6. If the system was able to read the USB ash drive that was plugged in, it will display
a list of les and folders as shown above. You can use the navigation buttons or Alpha
wheel to move up and down the list. Select the UP soft button if you want to go up to
the parent directory level. If the KUF le is selected, select the OK button.