Disk Mode
The Multiple Object Selector Page
13-36
Selection by Dependents
This mode is used to select a group of objects that are dependents of other objects. This is not
available in Load Object
Everything
"Everything" will include all objects in the list. You may prefer to use the All button for this
purpose.
Search String
This selection mode will ask for a search string to be entered, as soon as either the Toggle, Clear,
or Set button is pressed. The range for the selection/deselection will be any objects whose
names contain the search string, ignoring upper/lower case. Search String mode is not
available in Load Object.
Parameters Possible Values Function
Of Current Item,
Selected Items
If set to Current Item, selection range is confined to
those objects in the object list that are dependents of
the currently indexed item (Current =), including the
currently indexed item itself.
If set to Selected Items, then the selection range in-
cludes any objects in the object list that are dependents
of any currently selected objects. The currently in-
dexed item that is displayed is ignored unless it is al-
ready explicitly selected (has an asterisk).
Specify All,
All->Keymap,
All->Program,
Keymap->Sample,
Samples Only
This parameter is used to limit which dependent objects
are included in the selection range for the appropriate
objects included via the Of parameter. The normal set-
ting is All, which means all dependents are included.
The other settings are primarily useful when separating
objects into different files for reloading later using Mac-
ros and Relink-by-Name.
If set to All->Keymap, then the selection range will in-
clude any dependent objects down to the level of key-
maps. That is, samples will be excluded from the
selection range.
If set to All->Program, then the selection range will in-
clude any dependent objects down to the level of pro-
grams and effects. Another way of saying this is that any
Keymaps and Samples will be excluded from the selec-
tion range.
Keymap->Sample cause the selection range to only in-
clude dependent objects that are keymaps or samples.
Samples Only will just include sample dependents.
Current = Type, ID, and name of
the currently indexed
object
Displays the object that will be used if Current Items is
the value of the Of parameter.
To Next Page
Loading...