KYMCO MX'ER 50 - Front Suspension

12. FRONT WHEEL/FRONT BRAKE/FRONT
SUSPENSION/STEERING SYSTEM
12-9
MX’er 50
FRONT SUSPENSION
REMOVAL
Elevate the front wheels by placing a
suitable stand under the frame.
Remove the front wheel, wheel hub, brake
shoe plate.
Remove the upper and lower bolt, then
remove the shock absorber.
Remove the cotter pin and nut, then remove
tie-rod from steering knuckle.
Remove cotter pin, nut, washer and bolt,
then remove the steering knuckle, covers,
collar and bush from the front arm.
Upper Bolt
Lower Bolt
Support the machine securely so there is
no danger of it falling over.
°Ø
Tie-rod
Nut
Cotter pin
Steering Knuckle
Front arm
Cotter pin
Nut
Bolt
Washer
Steering Knuckle
Bush
Bush
Cover
Cover
Collar
www.PlanDeGraissage.org