MAINTENANCE SCHEDULE
This chapter includes all information necessary to perform recommended inspections and
adjustments. These preventive maintenance procedures, if followed, will ensure more reliable
vehicle operation and a longer service life. The need for costly overhaul work will be greatly
reduced. This information applies to vehicles already in service ad well as new vehicles that are
being prepared for sale. All service technicians should be familiar with this entire chapter.
Check condition. Clean or replace if
necessary.
Clean. Replace if necessary.
Check idle speed/starter operation.
Adjust if necessary.
Check fuel hose for cracks or
damage. Replace if necessary.
Replace (Warm engine before
draining).
Clean. Replace if necessary.
Check oil leakage. Replace every 12
months.
Check operation. Adjust if
necessary.
Check operation/replace if damage
or excessive wear.
Check balance/damage/runout.
Replace if necessary.
Check bearings assembly for
looseness/damage. Replace if
damaged.
Check operation/replace if damage.
Check toe-in/adjust if necessary.
Lubricate every 6 months.
Check all chassis fittings and
fasteners. Correct if necessary.
• In the interest of safety, we recommend these items should be serviced only by an
authorized KYMCO motorcycle dealer.
To Next Page
Loading...
