KYMCO MX'ER 50 - Service Information

3. INSPECTION/ADJUSTMENT
3-1
MX’er 50
SERVICE INFORMATION
GENERAL
°I WARNING
•Before running the engine, make sure that the working area is well-ventilated. Never run the
engine in a closed area. The exhaust contains poisonous carbon monoxide gas which may cause
death to people.
•Gasoline is extremely flammable and is explosive under some conditions. The working area
must be well-ventilated and do not smoke or allow flames or sparks near the working area or
fuel storage area.
SPECIFICATIONS
ENGINE
Throttle grip free play : 1_ 4mm
Spark plug gap : 0.6_ 0.7mm
Spark plug: Standard : NGK: BR8HAS
Idle speed : 2000±100rpm
Gear oil capacity :
At disassembly : 120cc
At change : 90cc
Cylinder compression : 12kg/cm_
Ignition timing : BTDC 22°/2000rpm
CHASSIS
Front brake free play: 10_ 20mm
Rear brake free play: 10_ 20mm
TIRE PRESSURE
1 Rider
Front
0.35kgf/cm_
Rear
0.35kgf/cm_
TIRE SIZE:
Front : 20*7-8
Rear : 22*10-8
TORQUE VALUES
Front wheel nut 6.0_ 8.0kgf-m
Rear wheel nut 6.0_ 8.0kgf-m
www.PlanDeGraissage.org