EasyManua.ls Logo

KYMCO MX'ER 50 - Wheels;Tires

KYMCO MX'ER 50
213 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. INSPECTION/ADJUSTMENT
3-13
MX’er 50
WHEELS/TIRES
Check the tires for cuts, imbedded nails or
other damages.
Check the tire pressure.
TIRE PRESSURE
1 Rider
Front
0.35kgf/cm_
Rear
0.35kgf/cm_
TIRE SIZE
Front : 20*7-8
Rear : 22*10-8
Check the front axle nut for looseness.
Check the rear axle nut for looseness.
If the axle nuts are loose, tighten them to the
specified torque.
Torque: Front : 6.0_ 8.0kgf-m
Rear : 6.0_ 8.0kgf-m
WHEEL INSPECTION
Inspect the tire surfaces.
Replace if wear or damage.
Tire wear limit: 3.0mm
Front Axle Nut
Tire pressure should be checked when
tires are cold.
°Ø
Rear Axle Nut
It is dangerous to ride with a worn out
tire. When a tire wear is out of
specification, replace the tire
immediately.
°Ø
www.PlanDeGraissage.org

Table of Contents

Related product manuals