KYMCO MX'ER 50 - Page 46

3. INSPECTION/ADJUSTMENT
3-4
MX’er 50
CLEAN AIR FILTER ELEMENT
Wash the element gently, but throughly in
solvent.
Squeeze the excess solvent out of the
element and let dry.
Apply the engine oil.
Squeeze out the excess oil.
CHANGE INTERVAL
More frequent replacement is required when
riding in unusually dusty or rainy areas.
Use parts cleaning solvent only. Never
use gasoline or low flash point solvents
which may lead to a fire or explosion.
°Ø
Do not twist or wring out the foam
element. This could damage the foam
material.
°Ø
The element should be wet but not
dripping.
°Ø
Air Cleaner Element
www.PlanDeGraissage.org