KYMCO SR25BA - Final Reduction Disassembly; Final Reduction Inspection

10-2
Countershaft
Final shaft
FINAL REDUCTION DISASSEMBLY
FINAL REDUCTION INSPECTION
10. FINAL REDUCTION
Remove the muffler.
Remove the rear wheel.
Remove the rear brake cable.
Remove the left crankcase cover.
Remove the clutch/driven pulley.
Drain the transmission gear oil into a clean
container.
Remove the transmission case cover attaching
bolts.
Remove the transmission case cover.
Remove the gasket and dowel pins.
Drive shaft
Final shaft
Countershaft
Inspect the countershaft and gear for wear or
damage.
Inspect the final gear and final shaft for wear,
damage or seizure.
Bolts
Movie S 125i