Movie S 125i
PREFACE
This Service Manual describes the
technical features and servicing
procedures for the Movie S 125i.
Section 1 contains the precautions for all
operations stated in this manual. Read
them carefully before any operation is
started.
Section 2 is the removal/installation
procedures for the frame covers, which
are subject to higher removal/installation
frequency during maintenance and
servicing operations.
Section 3 describes the inspection/
adjustment procedures, safety rules and
service information for each part, starting
from periodic maintenance.
Sections 5 through 11 give instructions
for disassembly, assembly and adjustment
of engine parts. Section 12 through 13 is
the removal/ installation of chassis.
Section 15 through 17 states the testing
and measuring methods of electrical
equipment.
Most sections start with an assembly or
system illustration and troubleshooting
for the section. The subsequent pages give
detailed procedures for the section.
KWANG YANG MOTOR CO., LTD.
QUALITY TECHNOLOGY DEPT.
EDUCATION SECTION
TABLE OF CONTENTS
GENERAL INFORMATION 1
EXHAUST MUFFLER/FRAME COVERS 2
INSPECTION/ADJUSTMENT 3
LUBRICATION SYSTEM 4
FUEL INJECTION SYSTEM
5
ENGINE REMOVAL/INSTALLATION 6
CYLINDER HEAD/VALVES 7
CYLINDER/PISTON
8
DRIVE AND DRIVEN PULLEYS/KICK
STARTER
9
FINAL REDUCTION 10
CRANKCASE/CRANKSHAFT 11
STEERING HANDLEBAR/FRONT
WHEEL/FRONT BRAKE/FRONT
SHOCK ABSORBER/FRONT FORK
12
REAR BRAKE/REAR FORK/REAR
WHEEL/REAR SHOCK ABSORBER`
13
BATTERY/CHARGING SYSTEM 14
IGNITION SYSTEM 15
STARTING SYSTEM 16
SWITCHES/HORN/FUEL UNIT/ THERMO-
STATIC SWITCH/TEMPERATURE
GAUGE/INSTRUMENTS/ LIGHTS
17
EVAPORATIVE EMISSION CONTROL
SYSTEM
18
The information and contents
included in this manual may be
different from the motorcycle in case
specifications are changed.
CHASSIS
E
UIPMENT
ENGINE
To Next Page
Loading...
Need help?
General