KYMCO SR25BA - Inspection and Adjustment Procedures

3
3. INSPECTION/ADJUSTMENT
3-0
SERVICE INFORMATION
GENERAL
WARNING
！
SPECIFICATIONS
ENGINE
Throttle grip free play : 2 ~ 6 mm
Spark plug gap : 0.6 ~ 0.7 mm
Spark plug : NGK - CR8E
Valve clearance : IN: 0.12 mm EX: 0.12 mm
Idle speed : 1800 100rpm
Engine oil capacity
At disassembly : 0.9 liter
At change : 0.8 liter
Gear oil capacity
At disassembly : 140 cc
At change : 120 cc
SERVICE INFORMATION.............................. 3-0
MAINTENANCE SCHDULE
...........................
...............................................
THROTTLE OPERATION
..............................
AIR CLEANER
..............................................
SPARK PLUG
VALVE CLEARANCE
....................................
CYLINDER COMPRESSION
........................
.........................................
.........................
FINAL REDUCTION GEAR OIL
......................
3-7
DRIVE BELT
BRAKE SYSTEM
STEERING HANDLEBAR
HEADLIGHT AIM
..............................
3-8
CLUTCH SHOE WEAR
................................. 3-8
SUSPENSION
.............................................. 3-8
WHEEL/TIRES
...........................................
............................
Movie S 125i
NUTS/BOLTS/FASTENERS
.........................
3-9
3-9
3-9
Before running the engine, make sure that the working area is well-ventilated. Never run the engine in
a closed area. The exhaust contains poisonous carbon monoxide gas which may cause death to people.
Gasoline is extremely flammable and is explosive under some conditions. The working area must be
well-ventilated and do not smoke or allow flames or sparks near the working area or fuel storage area.