OIL PUMP
Remove the A.C. generator flywheel.
Remove two bolts located on the A.C. Generator
and the other two bolts located on the CPS.
Remove the A.C. Generator and CPS.
Remove nine right crankcase cover bolts and the
right crankcase cover.
Remove the gasket and dowel pins.
Remove the starter idle gear and starter clutch.
Remove the two bolts and oil separator cover.
4-3
4. LUBRICATION SYSTEM
REMOVAL
Bolts
CPS
A.C. Generator
Right Crankcase Cover
Gasket
Dowel Pins
Remove the oil pump driven gear nut to remove the
oil pump driven gear and drive chain.
Oil pump drive chain
Bolts
Oil separator cover
Movie S 125i
To Next Page
Loading...
