Kyocera ECOSYS FS-1020MFP User Manual

2M4/2M5/2M6/2M7
2-4-10
7. Refitting the paper feed pulley
1.Insert the new paper feed pulley onto
the right side axle of the roller holder.
2.Turn the paper feed pulley.
3.Turn the paper feed pulley so that its
boss and the cutout on the right-side
roller holder mate with each other.
4.Slide the left-side roller holder.
* : Confirm that it is clicked in and locked.
Figure 2-4-20
8. Using the reverse procedure of
removing the lower feed guide, insert
the right side first, then the left side into
the machine. Insert bosses into the
holes on the main unit.
Figure 2-4-21
4
5
Right roller holder
1
2
3
1
2
Lower paper
feed guide

Kyocera ECOSYS FS-1020MFP Specifications

General

Print Technology	Laser
Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Connectivity	USB 2.0
Monthly Duty Cycle	20, 000 pages
Time to First Page	8.5 seconds
Duplex Print Mode	Manual
Scan Type	Flatbed
Output Capacity	100 sheets
Maximum Paper Size	A4
Functions	Print, Copy, Scan
Memory	32 MB
Print Speed	20 ppm
Copy Speed	20 pages per minute
Maximum Scan Area	8.5 x 14 inches
Fax Transmission Speed	Not supported