Kyocera ECOSYS FS-1020MFP - Page 48

2M4/2M5/2M6/2M7
1-2-18
1. Press the power switch to On.
2. Starting the toner Installation.
*: The installation is completed when the
operation panel shows the following, after
approximately 7 minutes.
Figure 1-2-32
3 in 1 25/26 ppm model,4 in 1 20/21,25/26 ppm model
1. Draw out the sub tray and lift the paper
stopper upright.
Figure 1-2-33
2. Use the cursor key to select the lan-
guage and press OK.
Installing the toner
&
Language
:*English
3 in1 25/26 ppm model
4 in1 20/21,25/26 ppm model
3 in1 20/21 ppm model
Make test printing
12
Sub tray
Paper stopper