Kyocera ECOSYS FS-1020MFP User Manual

2M4/2M5/2M6/2M7-1
1-3-16
New
Devel-
oper
Perform the toner installation of the developer unit.
Description
At replacement of the developer unit, perform toner install settings.
Purpose
Perform when the developer unit is replaced.
Method
3 in 1 25/26 ppm model, 4 in 1 20/21,25/26 ppm model
1. Enter the Service Setting menu.
2. Select [New Developer] using the cursor up/down keys.
3. Press [OK] in the confirmation display.
3 in 1 20/21 ppm model
1. Press and hold both Mode Select and Quiet Mode key for more than 5 seconds.
Completion
Press the Stop/Reset key.
New
Drum
Perform the installation of the drum unit.
Description
At replacement of the drum unit, perform drum rank clearance and drum usage time clearance.
Purpose
Perform when the drum unit is replaced.
Method
3 in 1 25/26 ppm model, 4 in 1 20/21,25/26 ppm model
1. Enter the Service Setting menu.
2. Select [New Drum] using the cursor up/down keys.
3. Press [OK] in the confirmation display.
3 in 1 20/21 ppm model
1. press and hold both Stop/Reset and Quiet Mode key for more than 5 seconds.
Completion
Press the Stop/Reset key.
items Description

Kyocera ECOSYS FS-1020MFP Specifications

General

Print Technology	Laser
Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Connectivity	USB 2.0
Monthly Duty Cycle	20, 000 pages
Time to First Page	8.5 seconds
Duplex Print Mode	Manual
Scan Type	Flatbed
Output Capacity	100 sheets
Maximum Paper Size	A4
Functions	Print, Copy, Scan
Memory	32 MB
Print Speed	20 ppm
Copy Speed	20 pages per minute
Maximum Scan Area	8.5 x 14 inches
Fax Transmission Speed	Not supported