2KA-2
1-3-27
U035
Setting the printing area for folio paper
Description
Changes the printing area for copying on folio paper.
Purpose
To prevent cropped images on the trailing edge or left/right side of copy paper by setting the actual printing
area for folio paper.
Setting
1. Press the OK key.
2. Select the item to be set.
3. Change the setting value using the Left/Right Select keys.
4. Press the OK key. The value is set.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
U037
Checking the operation of the fan motors
Description
Drives the fan motors.
Purpose
To check the operation of the fan motors.
Method
1. Press the OK key.
2. Select the motor to be operated.
3. Press the OK key. The operation starts.
4. To stop operation, press the Back key.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description Setting range Initial setting
Length Data Length 330 to 356 mm 330
Width Data Width 200 to 220 mm 210
Display Operation
All All fan motors are turned on.
Fixing Fuser fan motor (FUFM) is turned on.
Developing Developing fan motor 1, 2 (DEVFM1, 2) are turned on.
LSU Rear Developing fan motor 5 (DEVFM5) is turned on.
Middle Transfer Transfer fan motor 1 (TRFM1) is turned on.
Power Source Power source fan motor 1, 2 (PSFM1, 2) is turned on.
Container Container fan motor (CFM) is turned on.
Polygon Motor LSU fan motor (LSUFM) is turned on.
Rotary Guide Front fan motor (FRFM) is turned on.
Loop Sensor Loop fan motor (LFM) is turned on.
Middle Trans Belt Transfer fan motor 2, 3 (TRFM2, 3) is turned on.
Eject Eject fan motor (EFM) is turned on.
To Next Page
Loading...
