Section 7 COPIER MANAGEMENT
7-20
4
Verify that this is the ID-code that you want to delete, and
press the “Yes” key.
The touch panel will return to the screen in step 3.
Inch specifications
Metric specifications
NOTE
If you want to delete another ID-code, repeat steps 3 and
4.
5
Press the “Close” key.
The touch panel will return to the screen in step 2.
Change registered information
Perform the following procedure when you want to change a
previously registered department name or the corresponding
ID-code.
1
Access the copy management menu screen.
(See “Accessing the copy management menu screen”
on page 7-3.)
Inch specifications
Metric specifications
2
Press the “Management edit” key.
The “Management edit” screen will be displayed.
Inch specifications
Metric specifications
!
!
To Next Page
Loading...
