Section 7 COPIER MANAGEMENT
7-91
Copy limit
Perform the following procedure to set the limit for the number of
copies (or copy sets) that can be made at a time.
1
Display the “Copy default” screen.
(See “Accessing the copy default settings” on
page 7-66.)
Inch specifications
Metric specifications
2
Select “Preset limit” under the “Default menu” column on
the left side of the touch panel and then press the “Change
#” key.
The “Preset limit” screen will be displayed.
Inch specifications
Metric specifications
3
Press the “+” key or the “-” key to change the copy limit to
the desired setting.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
!
!
!"!
#
!
$
!
%%%
! "#
$$$
!
To Next Page
Loading...
