Section 7 COPIER MANAGEMENT
7-101
Slight changes in color copying may take place if your color copier
is used over a long period of time. If the color of the originals and
that which appears on the copies begins to differ greatly, use this
procedure to adjust the color.
1
With the content of the “Basic” tab displayed, press the
[Default Setting/Counter] key.
The “Default setting” screen will be displayed.
2
Press the “User adjustment” key.
Inch specifications
Metric specifications
3
Use the keypad to enter the 4-digit management code.
The factory default setting is “3100”.
If the entered code matches the registered one, the “User
adjustment” screen will be displayed.
Inch specifications
Metric specifications
4
Press the “Auto gray adjust” key. The “Auto gray adjust”
screen will be displayed.
Inch specifications
Metric specifications
Auto color adjustment
!
!
To Next Page
Loading...
