Section 7 COPIER MANAGEMENT
7-28
Turning the copy management function
ON/OFF
Perform the following procedure when you want to turn copy
management ON or OFF.
1
Access the copy management menu screen.
(See “Accessing the copy management menu screen”
on page 7-3.)
Inch specifications
Metric specifications
2
To turn copy management ON, press the “On” key. To turn
copy management OFF, press the “Off” key.
Inch specifications
Metric specifications
3
Press the “Close” key.
Changing the copy management default
settings
Perform the following procedure when you want to change the
default settings for the copy management function.
The following default settings are available.
• Copier function management ON/OFF (Page 7-29.)
• Printer function management ON/OFF (Page 7-30.)
• Printer error report (Page 7-31.)
• Non-standard printer driver printout (Printer) (Page 7-32.)
• Copy/Printer output management (Page 7-33.)
• Scanner function management ON/OFF (Page 7-34.)
• Fax function management ON/OFF (Page 7-35.)
• Response to exceeded restriction (Page 7-36.)
• Default copy limit (Page 7-37.)
• Total count for specified paper size (1 to 5) (Page 7-38)
Accessing the copy management default
settings
1
Access the copy management menu screen.
(See “Accessing the copy management menu screen”
on page 7-3.)
Inch specifications
Metric specifications
!
!
!
!
To Next Page
Loading...
